Guangzhou Rosin Packaging Co., Ltd
banner5

Which Blister Trays Material Is Trending Now? PET, PP or PS ?

Time: November 03, 2026

If you are sourcing custom blister trays, clamshells or thermoformed inserts for food, electronics, cosmetics or retail products, you have probably asked the same question: Which material do most buyers prefer today — PET, PP or PS?

There is no single “best” material for every project. Customer choices are driven by clarity, heat resistance, recyclability, budget, food contact rules and end-use scenarios. But in the current global packaging market, PET is the most widely popular general-purpose blister material, PP is fast growing for heat-resistant applications, while PS remains a budget option for simple internal trays.

PET (Polyethylene Terephthalate) — The Top Trending Choice for Most Brands

PET is now the mainstream pick for most retail and food blister packaging, including rPET (recycled PET) versions.

Why it is so popular:

  • Crystal-clear transparency and high gloss, perfect to showcase fruits, baked goods, cosmetics and electronic components on shelves. Shoppers can see the product directly without opening the pack.
  • Excellent food safety performance, compliant with FDA, EU food contact standards.
  • Great recyclability with well-established recycling streams worldwide (resin code #1). Many brands prioritize PET / rPET to meet sustainability targets and plastic regulations.
  • Good toughness, impact resistance and stable forming performance for complex custom cavities.
  • Works well for cold food, fresh produce, berry boxes, cookie trays, cosmetic blisters and anti-static electronic packaging.

Limitations: PET cannot withstand high heat. It is NOT microwave-safe and will soften or deform above roughly 70°C. It is not ideal for hot-fill or reheatable food.

PP (Polypropylene) — Fast-Growing for Heat-Resistant Packaging

PP is the rising star for applications where temperature resistance matters more than maximum clarity.

Why demand for PP blister keeps growing:

  • Outstanding heat resistance: microwave-safe, suitable for ready meals, hot food trays, takeaway containers and ovenable packaging. It can handle continuous heat up to 120°C.
  • Good moisture barrier, grease resistance and chemical stability. It resists oils, sauces and many common chemicals.
  • Flexible and less brittle than PS. It works for frozen food, medical trays that need sterilization, and reusable food containers.
  • Recyclable (resin code #5).

Limitations: PP is translucent rather than crystal clear. It has higher shrinkage during thermoforming, which needs precise mold and process control. It is harder to form into very deep or intricate shapes compared with PET or PS. Printing on PP also needs special surface treatment.

PS (Polystyrene / HIPS) — Still Used, But Less Preferred for Premium or Food Retail

PS was once common, but today it is mostly selected for low-cost internal inserts rather than consumer-facing retail packs.

Where PS still makes sense:

  • Low raw material cost, rigid structure and easy thermoforming for simple, shallow trays.
  • Fast production cycle for cheap inner supports, hardware inserts and disposable packaging where product visibility is not required.

Why it loses popularity in many modern projects:

  • Brittle and easy to crack under impact.
  • Poor oil and moisture barrier.
  • Recycling infrastructure for PS is weaker in many regions. Many retailers and food brands are phasing out PS to meet sustainability requirements.
  • Hazy look, not suitable for display packaging.

Quick Summary: How Buyers Choose in 2026

  • Pick PET / rPET if you need clear display packaging, food trays for cold items, cosmetic blisters or electronic trays, and sustainability & recyclability are priorities.
  • Pick PP if you need microwaveable, heat-resistant, hot-fill, frozen or sterilizable packaging.
  • Pick PS only for simple low-cost inner support trays, when budget is tight and clarity / drop resistance are not important.

Final Thought from Our Blister Factory

As an experienced thermoforming manufacturer based in Guangzhou, we provide OEM & ODM custom blister service for PET, PP, PS and anti-static ESD trays. The right material depends on your product, supply chain rules and market requirements. We help customers run material trials, rapid sampling and mold design to match the best solution without overspending.

If you are unsure which material fits your next project, send us your product specs and application details — our engineering team will recommend the most suitable blister material for you.

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

skype

whatsapp